Fitness Test For Muscular Endurance Brian Mac

1. Brian Mac Muscular Endurance Test
2. Muscular Endurance Exercises
3. Cardiovascular Endurance
4. Muscular Endurance Tests

Fitness can be measured by the volume of oxygen you can consume while exercising at your maximum capacity. VO2max is the maximum amount of oxygen in millilitres, one can use in one minute per kilogram of body weight.

Numerous studies show that you can increase your VO2max by working out at an intensity that raises your heart rate to between 65 and 85% of its maximum for at least 20 minutes three to five times a week.

As an endurance athlete, you will develop an enlarged heart. You will have: Bradycardia - Low resting pulse rate of under 50 bpm; ECG shows ventricular hypertrophy (thickening of the heart muscle wall) X-ray reveals an enlarged heart; Blood tests show raised muscle enzymes. Jul 16, 2019 Muscular endurance is the ability of a muscle to repeatedly exert force against resistance. Performing multiple repetitions of an exercise is a form of muscular endurance, as are running and swimming. Jul 24, 2017 Muscular endurance refers to the ability of a given muscle to exert force, consistently and repetitively, over a period of time. It plays a big role in almost every athletic endeavor. Anaerobic Threshold Testing Lthr Testing train your rugby brian mac multi stage fitness test table and workout brian mac multi stage fitness test table and workout press up test. Whats people lookup in this blog: Muscular Endurance Fitness Test Brian Mac; Muscular Strength Fitness Test Brian Mac.

Aerobic fitness is primary for most sports. It is important to think carefully about the fitness level of the individual and choose the test that is most appropriate for their sport or activity.

The objective of these tests is to measure and monitor the development of a individual’s general endurance (VO2max).

2 Minute step test

Purpose of test:

To assess aerobic endurance and lower body muscle endurance.

Equipment required:

• Stopwatch

• Tape measure

• Masking tape or marker

Test procedure:

Step 1: Establish the knee height

• Mark a point on the participant’s thigh, halfway between the participant’s patella and iliac crest

• Measure from this point to the ground with a tape measure

• Place a mark on the wall with masking tape at the height from the ground to the participant’s mid-thigh position.

Step 2: Give the participant these instructions

• On the instruction to start, step up and down on the spot.

• Lift your knees to the indicated mark on the wall.

• Continue to step as fast as you can for 2 minutes.

• If you tire, slow down or stop and rest.

6 Minute walk test

Procedure

The 6MWT should be performed indoors, along a long, flat, straight, enclosed corridor with a hard surface that is seldom travelled. If weather permits, the test may be completed outdoors. The walking track must be 30 metres in length and marked every 3 metres, with the turn-around points marked with a cone. Mark the start and finish lines with brightly coloured tape.

Instructions:

1. Repeat testing should be completed at the same time of day to minimise intra-day variability.
2. A ‘warm-up’ period before the test should not be performed.
3. The client should sit and rest in a chair for at least 10 minutes before the test. During this time, check for contraindications, measure pulse and blood pressure and ensure clothing and footwear are appropriate.
4. Pulse oximetry is optional. If performed, measure and record baseline heart rate and oxygen saturation. Make sure the readings are stable before recording. Note pulse regularity.

Note: If pulse oximeter is to be worn throughout the test, clinician is not to walk with the client. The pulse oximeter must be lightweight (less than 1 kg or 2 pounds), battery operated, and held in place so that the client does not have to hold or stabilise the pulse oximeter and therefore stride is not affected.

5. Have the client stand and rate their baseline dyspnoea and overall fatigue using the Borg Scale.

6. Set the timer to 6 minutes, assemble all necessary equipment and move to the starting point.

7. Instruct the client as follows:

The object of this test is to walk as far as possible for 6 minutes. You will walk back and forth in this hallway. Six minutes is a long time to walk, so you will be exerting yourself.

You will probably get out of breath or become exhausted. You are permitted to slow down, to stop and to rest as necessary. You may lean against the wall while resting but resume walking as soon as you are able.

You will be walking back and forth around the cones. You should pivot briskly around the cones and continue back the other way without hesitation. Now I’m going to show you.

Please watch the way I turn without hesitation.

Demonstrate by walking one lap yourself. Walk and pivot around the cones briskly without hesitation.

Are you ready to do that? I am going to use this counter to keep track of the number of laps you complete. I will click it each time you turn around at this starting line. Remember that the object is to walk AS FAR AS POSSIBLE for 6 minutes, but don’t run or jog. “Start now, or whenever you are ready”.

8. Do not talk to anyone during the test.

9. Use a standard tone of voice during encouragement:

Alert the first minute:

You are doing well. You have 5 minutes to go.

Alert 2 minutes:

Keep up the good work. You have 4 minutes to go.

Alert 3 minutes:

You are doing well. You are halfway done.

Alert 4 minutes:

Keep up the good work. You have only 2 minutes lefting.

Alert 5 minutes:

You are doing well. You have only 1 minute to go.

Note: Do not use other words of encouragement (or body language) to encourage the client to walk faster.

If the client stops walking or needs a rest during the test, say: You can lean against the wall if you would like; then continue walking whenever you feel able. Do not stop the timer.

If the client stops before the 6 minutes are up and refuses to continue (or the clinician decides that they should not continue), allow the client to sit down and note the distance, the time stopped and the reason for stopping prematurely.

When the timer is 15 seconds from completion, say: In a moment I’m going to tell you to stop. When I do, just stop right where you are and I will come to you.

At the completion, say Stop!

10. Post-test: Record the post-walk Borg and fatigue levels and ask: What, if anything, kept you from walking further?

11. If using a pulse oximeter, measure oxygen saturation (SpO2) and pulse rate on the oximeter and then remove the sensor.

12. Record the number of laps and any additional distance covered by using the markers on the wall. Calculate the total distance walked, rounding to the nearest metre.

Note: A practice test is not required in most clinical settings; however, it should be considered. If a practice test is completed, wait for at least 1 hour before the second test and report the highest 6MWD as the client’s baseline (ATS, 2002).

Note: Record the flow rate and the source of oxygen used by client. Note how the oxygen source was carried by the client (e.g. carried oxygen bottle, pushed or pulled cylinder) (ATS, 2002).

Note: The type of medication, dose and number of hours taken before test should be recorded.

Converting 6MWT results into exercise intensity

6-minute walk distance (6MWD)/6 = Distance in 1 minute

Distance in 30 minutes = 1-minute distance x 30

Note: The client would not be expected to keep up the same walking pace throughout the walking training session that they achieved in the 6MWT. Therefore, prescribe approximately80% of the calculated distance.

For example:

If the client walked 220 m in 6 minutes:

1-minute distance = 220/6 = 36.7 m

30-minute distance = 36.7 x 30 = 1100 m

80% of 1100 = 880 m target distance in 30 minutes

Normative data:

• The median 6MWD was approximately 580 metres for 117 healthy men and 500 metres for 173 healthy women (Miyamoto et al., 2000).

• A mean 6MWD of 630 metres was reported by another study of 51 healthy adults (Stevens et al., 1999).

Cooper's 12 minute run test

The Cooper 12 minute run is a popular maximal running test of aerobic fitness, in which participants try and cover as much distance as they can in 12 minutes.

• Purpose: to test aerobic fitness (the ability of the body to use oxygen to power it while running)
• Equipment required: flat oval or running track, marker cones, recording sheets, stop watch.

• Procedure: Place markers at set intervals around the track to aid in measuring the completed distance. Participants run for 12 minutes, and the total distance covered is recorded. Walking is allowed, though the participants must be encouraged to push themselves as hard as they can to maximize the distance covered.
• Scoring: There are Cooper test norm tables for general guidelines for interpreting the results of this test for adults. There are also several equations that can be used to estimate VO_2max (in ml/kg/min) from the distance score (a formula for either kms or miles):

VO_2max = (35.97 x miles) – 11.29
VO_2max = (22.35 x kilometers) – 11.29

• Target population: This test can be modified to be suitable for most populations. For those who are unfit or unable to run, there are similar walking tests that can be performed.

• Validity: Cooper (1968) reported a correlation of 0.90 between VO2max and the distance covered in a 12 min walk/run.
• Reliability: the reliability of this test would depend on practice, pacing strategies and motivation level. There should be good reliability if these issues are addressed.
• Advantages: large groups can be tested at once, and it is a very cheap and simple test to perform.
• Disadvantages: practice and pacing is required, and performance on this test can be affected greatly by motivation.
• Comments: the world record for 5000m is held by Kenenisa Bekele in 12:37.35. Based on that time, he would complete 4752m or 11.88 laps in 12 min.
• Variations / Modifications: The test can also be conducted by running on a treadmill for 12 minutes, set to level 1 (1 percent) incline to mimic outdoor running. There are also many variations of the walk / run test. A very similar test is the Balke 15 minute run. Testing is generally easier to administer when the distance is fixed and the finishing time measured, so the alternative Cooper 1.5 mile (2.4km) run test was developed.

Beep test

• The test involves running continuously between two points that are 20 m apart from side to side.
• The runs are synchronized with a pre-recorded tape (see link), which plays beeps at set intervals.
• As the test proceeds, the interval between each successive beep decreases, forcing the athletes to increase their speed over the course of the test until it is impossible to keep in sync with the recording
• The recording is typically structured into 21 ‘levels’, each lasting around 62 s.
• The interval of beeps is calculated as requiring a speed at the start of 8.5 km/h increasing by 0.5 km/h with each level thereafter.
• The progression from one level to the next is signaled by 3 quick beeps.
• The highest level attained before failing to keep up is recorded as the score for that test.

Bruce and Balke-Ware treadmill protocol

Purpose of test:

To assess cardio-respiratory endurance.

Equipment required:

• Treadmill with speed and grade of slope adjustment

• Rating of Perceived Exertion (RPE) Scale

• Scales

• Measuring tape

• Heart rate (HR) monitor (optional if the treadmill can monitor heart rate)

• Sphygmomanometer to measure blood pressure (BP)

Test procedure:

Record the baseline heart rate and blood pressure, as well as basic information including age, height, and weight. Calculate the predicted maximum heart rate and then 75% of the maximum heart rate. Allow the client to familiarise themselves with walking on a treadmill before conducting the test.

Note: See ‘Heart Rate’ test for calculations to predict maximum heart rate.

Set the initial treadmill speed at 3.3 mph (5.31 kph) and the gradient at 0%, and then instruct the client to start walking. Increase the gradient to 2% at the end of the first minute, and then increase by 1% at the end of every minute thereafter. At the end of every minute, record the heart rate and the RPE. If possible, measure blood pressure at the end of every 2 minutes. Continue to monitor the client’s appearance and expressions for the duration of the test (Maud & Foster, 2006). If the client reaches an incline of 25%, then gradually increase the speed by 0.2 mph (0.32 kph) per minute.

The test is terminated when the client reaches 75% of their maximum heart rate, when the client asks to stop, or when any of the indicators below are present.

Reasons for terminating the test include:

• Client experiences angina-like symptoms

• Client’s BP drops below 20 mmHg from the BP value recorded at rest or shows no increase in systolic BP with increased exercise intensity.

• Client has an excessive rise in systolic BP over 260 mm Hg and/or a diastolic BP over 115mm Hg.

• Client is not sweating; feels light-headed, confused, or unsteady; looks pale, or has blue lips.

Brian Mac Muscular Endurance Test

• Client’s heart rate does not rise with increased exercise intensity.

• Client has a noticeable change in heart rhythm.

• Client requests to stop.

Muscular Endurance Exercises

• Client shows physical or verbal signs of severe fatigue.

• Failure of the testing equipment.

Note: If the test is terminated due to any of the above the reasons, immediately remove the client from the treadmill.

Upon completion of the test, heart rate and RPE need to be recorded immediately and the grade of the treadmill returned to 0%. The client is then instructed to walk for a further 4 minutes, and heart rate and RPE are recorded at the end of each minute of recovery.

The following equation can be used to estimate VO2 max in millilitres per kilogram per minute (mL.kg–1.min–1) at the target heart rate (75 % of the predicted maximal heart rate):

Behringer digital pro mixer ddm4000 traktor 1. The DDM4000 is the ideal digital mixer for the DJ who is on the way to the top, or the club owner who has multiple DJs performing on a recurring basis. All preferences, such as fader curve, FX settings, EQ, Kill frequencies, etc., can be stored in individual user accounts and recalled instantly. Apr 02, 2014  Product Description. BEHRINGER DIGITAL PRO MIXER DDM4000: Ultimate 5-Channel Digital DJ Mixer with Sampler, 4 FX Sections, Dual BPM Counters and MIDI. 32-bit digital DJ mixer with beat-synchronized sampler, 4 multi-FX sections, 2 BPM counters, digital crossfader and MIDI. 4 Phono/Line stereo channels allowing up to 8 signal sources to be connected simultaneously. This article explains how to configure your Behringer DDM-4000 Audio Mixer as MIDI-controller in TRAKTOR. First, refer to the Behringer Manual section 7: The DDM-4000 as MIDI Controller.The DDM-4000 has no USB connection, which means that you will have to connect the DDM-4000 with a MIDI cable to your MIDI interface or Audio Interface with a MIDI connection.

VO2 max (mL.kg–1.min–1) = (0.1 x speed) + (1.8 x speed x grade) + 3.5

Cardiovascular Endurance

Note: Speed is expressed in metres per minute, and the grade is expressed as a decimal fraction, for example, 10% grade is 0.1 (Jones & Rose, 2005).

The following equation can also be used to determine VO2 max:

VO2 max (mL.kg–1.min–1) = 11.12 + (1.15 x time) (Neiman, 2007).

** make the test specific to the person, population and sport

Muscular Endurance Tests

Supporting Texts/Articles/Medias